Saturday, November 27, 2010

Did you know?...

That the term BIM was first was first coined by Charles M. Eastman at Georgia Tech? He has used it extensively in his book and papers since the late 1970s. Also, according to Jerry Laiserin, the first implementation of BIM was under the Virtual Building concept by Graphisoft's ArchiCAD, in its debut in 1987. The more you know...

http://en.wikipedia.org/wiki/Building_Information_Modeling#cite_note-3

Monday, November 22, 2010

Something you have been waiting for!!!

Are you a manufacturer looking to create Revit content for your architects or engineers? Are you an architect or engineering working with a building product manufacturer creating their content in Inventor? Well, the time has come:

BIM FAMILY TOOLKIT

From the website:

OverviewThe BIM Family Toolkit Technology Preview allows building product manufacturers the ability to easily export Inventor configuration data from iParts and iAssemblies (parameters, file properties & component visibility) directly to Revit families. Once the family data has been imported into Revit, users can create a simplified version and leverage the imported parameters and properties directly in Revit reducing the amount of time it takes to create BIM Ready Models.

Watch videos from YouTube that will provide a snip of how you create a family, and how to share family data from Autodesk Inventor into Autodesk Revit.

It will now be easier to for building product manufacturers to work with the AEC community, and provide them with what they need...are you on board?

Monday, November 8, 2010

What comes first...the services or the software?

Just like the old saying, "what comes first, the chicken or the egg?" the same can be said about services and software. When it comes to the AEC community, the software is the tool that will assist in attaining the end goal; the people and workflow is what is going to make the end goal result in the most efficient manner. But there are so many companies that purchase Revit, or even the vertical AutoCAD platforms, for that matter, and then expect their users to pick it up like they did AutoCAD...but it really doesn't work that way...

Even if a company is embedded in the AutoCAD workflow, working in Revit is completely different. Even if you are not ready to embark into full out training, you should always work with your reseller to put together a plan of attack. Implementing Revit is a process, and requires planning. The question comes to whether you plan first, then buy the software, or buy the software then create a plan. Many buy the software first, then decide what do to...but is that the best plan? In my opinion, no.

Revit itself may not necessarily be the only software you need. If you are an engineer, 3DS Max may be a good add for lighting calculations. If you are an architect, Ecotect may be a good add for lighting simulation. If you are a contractor, NavisWorks may be the way to go. You won't know until you speak to your reseller and decide what your end goal is. Then put together a plan of how you are going to get there...this plan typically will have multiple parts, from start, to first project, to analysis and beyond...however...

...without training, here is my 2 cents, from my experience:

1) Practice, practice, practice...whether it be tutorials or working on a project you have already done in AutoCAD, then recreating it in Revit...or watching uTube videos...anything to learn will benefit you in the end.

2) Use your reseller for their experience. They have done this many times. Specific topics can be taught in a few hours, if not less. Make sure you are equipped with the knowledge to begin a project (creating a Central File, working with Worksets). Will you be working with multiple consultants? Make sure you are setting up your Coordinate System and your consultants know how to mirror them. There is so many ways your reseller can help you; utilize their abilities.

3) Will your Construction Documents be ready to go out when you need them to? Is the Font correct? Line Weights? Fill (Hatch) Patterns? You don't want to spend the time you normally go through coordinating your Construction Documents (which you no longer have to do), perfecting your deliverable.

4) What is the first phase of your new workflow? Are you simply looking to use Revit for the single file benefits and getting your Construction Documents out the door? That's okay...but make sure you are taking the steps to do that efficiently. A plan is the best way. Whether with your reseller, or within your firm, begin to plan your future as a BIM company.

This is just the beginning...

Thursday, November 4, 2010

New Standards: ASHRAE Green Standard 189.1 (Standard for the Design of High-Performance, Green Buildings)

Did you know ASHRAE has new standards? From ASHRAE's website:

Standard 189.1 provides a “total building sustainability package” for those who strive to design, build and operate green buildings. From site location to energy use to recycling, this standard sets the foundation for green buildings by addressing site sustainability, water use efficiency, energy ef¬ficiency, indoor environmental quality, and the building’s impact on the atmosphere, materials and resources. Standard 189.1 serves as a jurisdictional compliance option to the Public Version 1.0 of the International Green Construction Code (IgCC) published by the International Code Council. The IgCC regulates construction of new and remodeled commercial buildings.

The Green Standard

Press Release (January 2010): Standard 189.1 to Provide a Strong Foundation for High-Performance Green Buildings